Defining The Hardware - Siemens SIMATIC C7-621 Manual

Programming Preparations

Defining the hardware

Open the station system_1 by double-clicking on it. Select the Hardware folder and open it, again
with a double click.
In the Hardware Configuration window go to the Hardware Catalog via Insert → Hardware Compo-
nents . Mark here the C7-621 AS-i via SIMATIC 300 → C7 to display brief information on the control
station.
Double-click on C7-621 AS-i to insert the device into slot 2 in the Hardware Configuration window.
Here you will see information on the set MPI address of the C7-CPU (default setting for the MPI
address is 2) and an address map.
To save the configuration, select Station → Save and Compile from the menu bar.
16 Getting Started with C7-621-AS-i
04/99