Copy Mode; Changing To Copy Mode - Ricoh Aficio 350e Operating Instructions Manual

Copy Mode

Changing to Copy Mode

You can always make a copy when
the machine isn't printing or scanning
a fax data.
A
Press the {Copy} key.
The copy display appears on the
panel display.
Reference
For details, see the "Copy Refer-
ence".
Interrupt copying to make urgently
needed copies
You can interrupt the current job to
make a copy.
Limitation
You cannot use the interrupt copy
function in the following cases:
• during fax immediate transmis-
sion
• while scanning an original for
memory transmission
• during interrupt copying
A
Press the {Interrupt} key.
If the machine is scanning origi-
nals, it will immediately stop the
scanning job. On the other hand, if
the machine is performing a copy
or print job, it will still continue the
job until you press the {Start} key
after pressing the {Interrupt} key.
When the current job stops, the in-
terrupt copy display appears on
the panel display.
Note
When you interrupt a copying
job, remove the previous origi-
nal.
B
Make your copies.
Important
If the remaining memory space
is 0%, the machine fails to re-
ceive fax data. Wait until the
machine completes printing a
received fax, then start making
copies.
Note
While copying, a received fax
document is stored in memory
and the Receive File indicator is
lit.
C
After interrupt copying is com-
pleted, remove the original and
delivered copies.
D
Press the {Interrupt} key again.
The machine resumes the printing
job of the received fax document.
Copy Mode
1
9