Inspecting And Changing Fuses - Honda FIT 2014 Online Reference Owner's Manual

Main Menu Table of Contents

Inspecting and Changing Fuses

Fuse
Blown
Fuse Puller
1. Turn the ignition switch to LOCK
headlights and all accessories off.
2. Check the fuses in the engine
compartment.
u
If the fuse is blown, have it replaced by a
dealer.
3. Inspect the small fuses in the engine
compartment and the vehicle interior.
u
If there is a burned out fuse, remove it
with the fuse puller and replace it with a
new one.
uuFusesuInspecting and Changing Fuses
( 0 . Turn 1Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Replace fuse with a spare fuse of the same specified
amperage.
Confirm the specified amperage using the charts on
P. 260 and P. 261.
There is a fuse puller on the back of the engine
compartment fuse box cover.
263