Table of Contents
Advertisement
Step 4.
Pull the slide forward and insert the pins and the latch into the flange holes at the front of the rack.
Figure 19. Left slide front installation
Step 5.
Repeat steps Step 1 1 on page 33 through Step 4 4 on page 34 to install the other slide rail. Ensure
that each slide rail is securely engaged in the flange by:
1. Inspecting to confirm that the hook has caught in the rack.
2. Moving the slide rail backward and forward to ensure that it does not pop out.
Step 6.
Insert a M5 screw and washer into the rear bracket of each slide rail, and then fasten the two M5
screws to secure the slide rails to the rack flanges.
Figure 20. Securing the compute block slide rails
The installation of the compute block slide rails in a rack is now complete.
To continue with the installation of the ThinkAgile CP compute block, follow these steps: "Install the compute
enclosure" on page 35
34
Lenovo ThinkAgile CP Hardware Installation Guide
Advertisement
Table of Contents
