Connecting Cables - Motorola Avigilon H4 Series Installation Manual

8. Loosely thread the lock nut onto the NPT adapter, then secure the NPT adapter into the pendant wall
mount.
9. Connect the safety lanyard from inside the NPT mount adapter to the anchor on the PTZ dome
camera.

Connecting Cables

Refer to the diagrams in the Overview section for the location of the different connectors.
To connect the cables required for proper operation, complete the following:
1. Make sure the safety lanyard is connected to the PTZ dome camera.
2. If there are external input or output devices that need to be connected to the camera (for example:
door contacts, relays, analog video, speakers, etc.), connect the devices to the camera I/O connector
cable.
Connecting Cables 9