Connecting To External Audio And I/O Devices - Motorola Avigilon 1.3C-H5SL-BO1-IR Installation Manual

Connecting to External Audio and I/O Devices

Important: This product is intended to be supplied by Power over Ethernet (PoE). Do NOT connect
auxiliary power to the audio or I/O wires or the camera will be damaged.
WARNING — This product is intended to be supplied by Power over Ethernet (PoE) that is a
"Limited Power Source" or "LPS", rated 48 VDC, 9 W min.
External audio and I/O devices are connected to the camera through the audio and I/O wires. The pinout for
the wires is shown in the following diagram:
1. Grey — Audio Input (line level)
An external power amplifier should be used when connecting speakers and microphones, as shown
in the diagram.
2. Red — Audio Ground
3. Pink — Audio Output (line level)
4. Green — Ground
5. Yellow — Digital Input
6. Brown — Digital Output
* — Relay
l
** — Switch
l
M — Microphone
l
S — Speaker
l
Connecting to External Audio and I/O Devices 15