CYBEX CP-21072 Owner's Manual page 21

G. Ensure cables are connected properly. The power
and coax cables thread into the monitor. The
composite video cables slide into the monitor. The
RJ-45 connectors are color coded and will click into
the monitor.
H. Using a Phillips screwdriver, install the fi ve screws
that secure the back cover in place. See Figure 6.
NOTE: Ensure cables are not pinched or damaged.
Figure 6
I. Install the back cover by sliding the back cover into
the upper tab on the monitor (A). See Figure 7.
Upper Tab
A
Figure 7
J. Rotate the back cover down until it clicks into the
two tabs at the base of the monitor (A). See
Figure 7.
Back
Cover
Screws (5)
Back
Cover
Tabs
5-3