DISASSEMBLY AND REASSEMBLY
3-17. Main PCB and Inverter PCB Disassembling (whole)
Work sequence
1. Pull the refrigerator forward to make space for servicing.
2. Disassemble the four screws.
3. Disassemble the thirteen connectors of the
housing(Number of the housing connectors may vary
dependent upon models and functions). While pressing
the upper hook on the location shown on the figure, pull
the main main PBA and remove it.
4. Disassemble the five connectors of the housing.
While pressing the hooks on the left and the right side
on the locations shown on the figure, pull the inverter
PBA and the SMPS PBA to remove them.
37
Remarks