Phone - Tesla MODEL S Operating Manual

®
Bluetooth Compatibility
You can use your Bluetooth-capable phone
hands-free in Model S provided your phone is
within operating range. Although Bluetooth
typically supports wireless communication
over distances of up to approximately 30 feet
(9 meters), performance can vary based on
the phone you are using.
Before using your phone with Model S, you
must pair it. Pairing sets up Model S to work
with your Bluetooth-capable phone (see
Pairing a Bluetooth Phone
You can pair up to ten Bluetooth phones.
Model S always automatically connects to the
last phone that was used (provided it is within
range). If you want to connect to a different
phone, see Connecting to a Paired Phone
page 144.
Note: On many phones, Bluetooth turns off if
the phone's battery is low.
Note: In addition to phones, you can also pair
Bluetooth-enabled devices with Model S. For
example, you can pair an iPod Touch or an
iPad or Android tablet to stream music.
Pairing a Bluetooth Phone
Pairing allows you to use your Bluetooth-
capable phone hands-free to make and
receive phone calls, access your contact list,
recent calls, etc. It also allows you to play
media files from your phone. Once a phone is
paired, Model S can connect to it whenever
the phone is within range.
To pair a phone, follow these steps while
sitting inside Model S:
1. Ensure both the touchscreen and the
phone are powered on.
2. On your phone, enable Bluetooth and
ensure it is discoverable.
Note: On some phones, this may require
you to go to Bluetooth Settings for the
remainder of the procedure.
3. Touch the Bluetooth icon on the top of the
touchscreen.
4. On the touchscreen, touch Add New
Device > Start Search. The touchscreen
displays a list of all available Bluetooth
devices within operating distance.
5. On the touchscreen, touch the phone with
which you want to pair. Within a few
seconds, the touchscreen displays a
randomly generated number, and your
phone should display the same number.
Using the Touchscreen
on page 143).
on
6. Check that the number displayed on your
phone matches the number displayed on
the touchscreen. Then, on your phone,
confirm that you want to pair.
7. If prompted on your phone, specify
whether you want to allow Model S to
access your contacts and media files.
When paired, Model S automatically connects
to the phone, and the touchscreen displays
the Bluetooth symbol next to the phone's
name to indicate that the connection is active.
Importing Contacts and Recent
Calls
Once paired, you can use the Bluetooth
settings screen (touch the Bluetooth icon on
the touchscreen's top status bar) to specify
whether you want to allow access to your
phone's contacts and recent calls. If access is
turned on, you can use the phone app to
display, and make calls to, people in your list
of contacts and on your recent calls lists (see
Using the Phone App
Note: Before contacts can be imported, you
may need to either set your phone to allow
syncing, or respond to a popup on your phone
to confirm that you want to sync contacts.
This varies depending on the type of phone
you are using. For details, refer to the
documentation provided with your phone.
Note: You can turn access to your contacts
and recent calls on or off at any time by
displaying the Bluetooth settings screen,
choosing the phone, and then changing the
setting associated with contacts and recent
calls.
Unpairing a Bluetooth Phone
If you want to disconnect your phone and use
it again later, simply touch Disconnect on the
Bluetooth settings screen. If you do not want
to use your phone with Model S again, touch
Forget This Device. Once you forget a device,
you need to pair it again if you want to use it
with Model S (see Pairing a Bluetooth Phone
on page 143).
Note: Your phone automatically disconnects
whenever you leave Model S.

Phone

on page 144).
143