Important Programming Notes - Philips VR675/05 Operating Instructions Manual

Important programming notes

•
When recordings have been programmed,
the display.
•
The programmed recording will always be made at the
recording speed (SP/LP) that at the time has been
selected on the video recorder.
•
You cannot operate the set manually while a programmed
recording is being made. If you want to interrupt the
programmed recording, press the
•
If the video recorder is switched on a few minutes before
a programmed recording is due to take place,
'TIMER RECORD' will flash on the TV screen.
•
If the end of the cassette is reached during a
programmed recording, the video recorder automatically
ejects the cassette.
•
If you forget to load a cassette, after programming the
recording, 'NO CASSETTE' will appear on the TV screen
for a few seconds.
•
If you insert a cassette with erase protection, after
programming the recording, 'PROTECTED CASSETTE' will
appear on the TV screen for a few seconds.
The cassette will then be ejected.
•
When all TIMER blocks have been programmed,
'TIMER FULL' appears on the TV screen at step
•
If 'CODE ERROR' appears on the TV screen, the
VIDEOPlus+ code was incorrect or the date was in-
correctly entered. Repeat the entry or end with the
STANDBY m
button.
With programming at daily intervals, the first recording
must take place within a week.
•
If 'DAILY ERROR' appears on the TV screen, the date was
incorrectly entered. Programming at daily intervals can
only be used for recordings to be made from Mondays to
Fridays inclusive.
•
Programme numbers 'E1' and 'E2' are provided for
programmed recordings from external sources (via the
EXT.1 EXT.2
or scart socket).
k appears in
STANDBY m
button.
1
.
9