Pip Menu - Philips BDL6545AT/00 User Manual

User Manual BDL6545AT
5.2.4.

PIP MENU

Note: For Component, VGA, DVI-D and HDMI inputs only.
PIP
To turn PIP mode on/off.
Use the UP/DOWN button to make selection.
PIP input
Select the input source for the sub-picture.
Use the UP/DOWN button to make selection.
PIP change
Enlarges the smaller picture to become the main picture, and vice versa.
Use the PLUS/MINUS button to make selection. Select Reset and then SET to restore settings to factory
preset values. Press the EXIT button to cancel and return to the previous menu.
PIP size
Select the size of the sub picture in the PIP (Picture-in-Picture) mode.
Use the UP/DOWN button to toggle between
• Large
• Small
PIP audio
Select the audio source in the PIP (Picture-in-Picture) mode.
Use the UP/DOWN button to toggle between
• MAIN - Select audio from the main picture
• Sub - Select audio from the sub picture.
PIP reset
Reset all settings in the PIP menu.
Use the PLUS/MINUS button to make selection. Select Reset and press the SET button to restore
settings to factory preset values. Press the EXIT button to cancel and return to the previous menu.
Notes:
• The PIP function is only available under certain signal source combinations as shown in the table below.
• Medium
Main picture signal source
Video S-Video Component
RETURN TO THE CONTENTS
VGA DVI-D HDMI OPS