Connecting Another Bdl6545At Display; Connecting The Touch Module - Philips BDL6545AT/00 User Manual

User Manual BDL6545AT
3.5.

CONNECTING ANOTHER BDL6545AT DISPLAY

You can interconnect multiple BDL6545AT displays to create a daisy-chain configuration for applications such as a video
wall. However, if you will be actively using the touch screen application, we do not recommend video wall mounting.
Note: The number of displays that can be used in a daisy-chain configuration will depend on the resolution of the input signal being
used.
• Connect the VGA OUT connector of the display to the VGA IN connector of additional BDL6545AT unit.
Note: You can connect up to 5 displays using the VGA OUT connectors.
• Connect the RS232C OUT connector of the display to the RS232C IN connector of additional BDL6545AT unit.
Additional
BDL6545AT
display
The first
BDL6545AT
display
3.6.

CONNECTING THE TOUCH MODULE

There are two ways to connect the touch module.
1. Connect the USB cable on the display to a PC.
The touch module supports easy Plug-and-Play operations. There is no need to install additional drivers on the PC.
2. Install an OPS (Open Pluggable Specification) module in to the slot on the rear of the display. Refer to the module's
documentation for user instructions.
PC
OPS module
RETURN TO THE CONTENTS