Using The Conditional Access Module (Cam) - Philips 26HF5335D/12 User Manual

19 Using the Conditional
Access Module (CAM)
The Conditional Access Module (CAM)
menu provides access to functions contained
on the CAM. The module can be inserted
into the Common Interface (CI) slot located
at the backside (facing downwards) of the TV.
Note
This Common Interface (CI) module does
not come with the TV set. It can only be
obtained when you subscribe to service
providers like Pay TV or other service
providers.
IMPORTANT
Always switch the TV off before inserting or
removing the module.
Inserting the CAM
1
Switch off the TV.
Common
Interface slot
Module
26
Connectors at
rear of TV (facing
downward)
2
Some modules come with a viewing
card. When using this type of module,
first insert the viewing card into the
module. Ensure that the arrow on the
viewing card faces the arrow of the
module before inserting into the
module slot.
3
Insert the module into the Common
Interface (CI) slot on the TV.
4
Switch on the TV.
5
Press the
setup menu.
6
Use the ï key to select Access
restriction and press the Æ key.
7
Press the Æ key to enter into the
Conditional Access Module menu.
8
Press button as indicated on the
screen to access the CAM's functions.
IMPORTANT
If no module is inserted, or the module
is not inserted properly, the Conditional
Access Module menu will not be displayed.
(If you have inserted a module, check that
it is fully inserted in the correct manner as
mentioned in step 2 above).
The functions that now appear on screen
are dependent on the contents of the
selected Conditional Access Module in your
country. Refer to the instruction supplied
with the module or contact the vendor.
key to display the