Installer Tv Settings - Philips 37HFL4482F/F7 User Manual

Installer TV Settings

This section allows the Installer to customize the TV
performance and general settings.
■ Language: "English", "Spanish", "French"
■ Picture: This feature allows the installer to customize
the Picture setting of the TV set. Options are "Smart
Picture", "Brightness", "Colour", "Contrast", Sharpness",
"Tint", "Active Control", "Backlight control", "Colour
Temp".
■ Audio: This feature allows the installer to customize
the audio settings of the TV set. Options are: "Smart
Sound", "Equalizer", "Balance", "AVL", "Default HDMI1
Audio", "Default HDMI2 Audio", "Default HDMI3
Audio", "Loud Speaker Mute", "Bathroom Speaker
Volume".
Note
• Default HDMI 1, 2, 3 Audio enables the customization of
the default audio path of the HDMI1, 2, 3 input source.
VGA can be selected if HDMI1, 2, 3 is dedicated for PC
input where the audio input is via the PC audio in.
• Bathroom speaker volume allows you to confi gure the
volume behavior of the bathroom speaker output. If set to
Variable, the bathroom speaker volume will be identical to
the TV loudspeaker volume. If set to Fixed, the bathroom
speaker volume will be fi xed at a constant level output..
■ Security Options - This section allows the Installer to
customize the Security settings of the TV.
There are : "Security", "Keyboard Lock", Remote
Control Lock", "SmartSecure"
■ Security - This function sets the Security access level of
the TV Setup Menu. If set to High, access to the Setup
menu is via the Installer Remote Control only. If set to
Standard, access to the Setup Menu is via the Installer
Remote Control, or via a keycode sequence on the
normal Guest Remote Control.
■ Keyboard Lock - This function enables/disables the
Keyboard buttons on the TV. If set to No, all keys are
enabled. If set to Yes, all keys are locked except for the
Power key. If set to All, then all keys are locked including
the Power key.
■ Remote Control Lock - This function enables/disables
the processing of the Guest remote control signals.
Installer remote control signals will still function
regardless of the setting.
■ Smart Secure - This function enables/disables the
SmartSecure feature, which will check for a special
security ID on a specific TV channel (when enabled).
If the ID is found, the TV will function. If the ID is not
found, the TV will display an error message and not
function. This functionality requires an external device
(PSG) to be installed in the property head end. Contact
you Philips sales associate if this functionality is required.
21