Table of Contents
Advertisement
34
ENGLISH
Audio
PC
Chapter 11 - Overview of SL300i connections
Connect the SL300i directly to the TV.
1
Connect a SCART (EURO) cable between the SCART audio/video connection 4 of the
SL300i and your TV.
> This will enable you to view the user menus and multimedia content on the television
screen.The television will also provide audio playback.
See the chapter 'Options menu' on page 35-39 of the extended User Manual on
CD-ROM for choosing the connection type (RGB or CVBS): For best video performance,
select RGB (check the manual of your TV).
If your TV goes blank after switching to RGB mode, then your TV does not support RGB.
In this case, select CVBS by keeping the GREEN key pressed for at least 4 seconds to
activate the default video output settings. (SL300i needs to be switched on.)
2
Connect a stereo audio cable between the Audio L/R output (stereo) 2 of the SL300i
and the audio input of your sound system.
> Making this connection enables you to listen to audio playback through your sound
system.
3
If you want to use the Ethernet port 3 on the SL300i, see the chapter on making a
wired network connection on page 15-17.
4
Connect the power adapter between the DC-in input 5 of the SL300i and a mains
socket that provides electrical power.
> The indicator in the Power button lights up after connecting the SL300i to the mains.
Advertisement
Table of Contents
