Adjust System Settings; Turn Demo Mode On/Off; Select Start Volume; Turn Beep Sound On/Off - Philips CEM200/55 User Manual

7 Adjust system
settings

Turn demo mode on/off

When demo mode is on, when the unit is
idle for more than 2 minutes, all functions are
displayed.
1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly to until [DEMO]
is displayed.
»
The screen shows current Demo
mode setting.
3
Turn to select a setting:
[DEMO ON] : Turn on the demo
mode.
[DEMO OFF] : Turn off the demo
mode.

Select start volume

Each time you turn on the unit, it can play at the
last listened volume or at the preset volume.
1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly to until [V -
LAST] or [V - ADJ] is displayed.
3
Turn to select a setting:
[V - LAST] : Each time you turn on
the unit, the volume remains from its
previous use.
[V - ADJ] : Each time you turn on
the unit, the volume is at the preset
level.
Store preset volume
You can turn on the unit at a preset volume.
1
Select [V - ADJ] as the start volume.
2
Press MENU/DISP for 3 seconds.
18 EN
3
Press or repeatedly to until [A-VOL]
is displayed.
4
Turn to select a value: 0 - 47.

Turn beep sound on/off

Each time you press a button, the unit beeps.
You can turn off/on this beep sound.
1
Press MENU/DISP for3 seconds.
2
Press or repeatedly to until [BEEP
ON] or [BEEP OFF] is displayed.
3
Rotate to select a setting:
[BEEP ON]: Turn on the beep
sound.
[BEEP OFF]: Turn off the beep
sound.

Turn display scroll on/off

For track information that is longer than the
display panel: you can select to cut off the
remainder of the text, or scroll to display the
full text.
Note
If any special characters are present in the
MP3 track name or album name, it may not
display correctly on the screen because these
characters are not supported.
Some WMA is protected by Digital Rights
Management (DRM), it cannot be played on
the unit.
unit are not displayed or played.
1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly to until [ROLL
ON] or [ROLL OFF] is displayed.
3
Turn to select a setting:
[ROLL ON] (scroll on): Auto scroll
during play.
[ROLL OFF] (scroll off): No auto
scroll display.