Safety Instructions Operation; Product Properties; Connection - ULTIMATE SPEED ULG 17 A1 Operation And Safety Notes Translation Of The Original Instructions

damaged or frozen batteries!
Otherwise, property damage
may be the consequence.
Please refer to the original
„ „
operating instructions about
the maintenance of your
battery prior to connecting
the car battery charger!
Otherwise, there is a danger
of injury and/or the risk of
damage to the device.
Before connecting the car
„ „
battery charger to a battery
that is continually connected
to the vehicle, learn about
compliance with the electrical
safety and maintenance in
the original operating instruc-
tions of the vehicle! Otherwise,
there is a danger of injury
and/or the risk of property
damage.
Disconnect the car battery
„ „
charger from the mains current
when it is not in use to protect
the environment as well! Note
that power is also consumed
in the standby operation.
Always pay attention and be
„ „
aware of what you are doing.
Proceed reasonably and do
not put the car battery charger
into operation when you are
not focused or not feeling well.
Safety instructions / Operation
z Operation
Always pull the mains plug from the
socket before you perform any work
at the car battery charger.
DANGER OF ELECTRIC SHOCK!
DANGER OF PROPERTY DAMAGE!
DANGER OF INJURY!
z Product properties
This device is designed for charging many
SLA batteries (sealed lead-acid batteries),
which are mostly used in cars, motorcycles
and some other vehicles. They can be,
e.g., WET (with liquid electrolyte), GEL
(with electrolyte gel) or AGM batteries
(with electrolyte-absorbent mats). A special
design of the device (also called a "three-
stage charging strategy") permits recharging
of the battery to nearly 100% of its capacity.
The battery may also be permanently
connected to the car battery charger in order
to keep it in optimal condition at all times.
Furthermore, the battery charger has an
integrated temperature sensor in the device
in order to safely charge the battery to full
even in cold weather (e.g. in the winter).
The device measures the ambient temperature
and automatically sets the optimal charging
voltage.
Note: The ambient temperature is measured
in the charger. Hence, for optimum function,
make sure the battery exhibits the same
temperature as the environment.
z Connection
Disconnect the minus pole connection
„ „
cable (black) of the vehicle from the minus
pole of the battery first before charging
and maintenance charging if the battery
GB/MT 57