Scanning With Captureperfect - Canon ImageFORMULA 102 User Manual

Scanning with CapturePerfect

You can use the CapturePerfect software provided with the connected
Canon document scanner to specify the scanning conditions and saving
options before scanning.
The following describes how to scan documents with CapturePerfect
using the [Scan Batch to File] setting. When you use this scanning
method, documents that are scanned one sheet at a time on the
flatbed are saved to the same image file.
This section describes the scanning procedure in CapturePerfect 3.1.
The same procedure can be used in CapturePerfect 3.0.
NOTE
For details on other scanning methods, refer to the CapturePerfect
Operation Guide.
1
From the Windows Taskbar, click [Start] and select [All
Programs], [CapturePerfect 3.1], and [CapturePerfect
3.1].
CapturePerfect starts.
2
Select [Select Scanner] from the [Scan] menu.
The [Select Scanner] dialog box appears.
3
Select the name of the Canon document scanner you are
using which should be followed by "w/FSU102", and click
the [Settings] button.
The [Configure Device Settings] dialog box appears.
IMPORTANT
If only the scanner name appears, try reinstalling the software
included on the setup disc provided with the flatbed.
4
Click [OK] to finish scanner selection.
5
Select [Scan Batch to File] from the [Scan] menu.
The [Scan Batch to File] dialog box appears.
15