Technical Data - Hilti TE 50 User Manual

3.3 Intended use
The product described is an electrically-powered combihammer with pneu-
matic hammering mechanism. It is designed for drilling in concrete, masonry,
wood and metal. The product can also be used for light to medium-duty
chiseling on masonry and surface finishing work on concrete.
▶ Operation is permissible only when connected to a power source providing
a voltage and frequency in compliance with the information given on the
type identification plate.
3.4 Possible misuse
• This product is not suitable for working on hazardous materials.
• This product is not suitable for working in a damp environment.
3.5 Active Vibration Reduction
The tool is equipped with an Active Vibration Reduction (AVR) system which
reduces vibration noticeably.
3.6 Quick-release chuck (accessory)
The quick-release chuck makes it possible to change accessory tools
quickly, without need for a chuck key (keyless system). It is suitable for
accessory tools with a cylindrical or hexagonal shank, such as drill bits for
wood and metal, or mixing paddles, which are used in the rotary-only mode
(without hammering action)
3.7 Service indicator
The product has an LED service indicator.
Status
Service indicator shows
Service indicator flashes
3.8 Items supplied
Combihammer, side handle, operating instructions.
Other system products approved for use with this product can be found at
your local Hilti Store or online at: www.hilti.group.
4

Technical data

For rated voltage, rated current, frequency and/or input power, refer to
the country-specific type identification plate.
*2102963*
Printed: 14.12.2018 | Doc-Nr: PUB / 5283567 / 000 / 03
.
Meaning
Servicing is due.
The product is faulty. Have the
combihammer repaired by Hilti Ser-
vice.
2102963 English 7