Appendix - Linksys HomeLink Series User Manual

Phoneline Configuration
You can set the Phoneline port to operate in sever-
al different modes. The phoneline port will default
to Auto Config mode. This mode automatically
sets the port to High Power/High Speed mode.
These port settings will only take effect if and
when the Phoneline port is selected as the default
port or if the card is in Auto Detect mode and the
Phoneline link is active.
• Setting the card in Low Power/High Speed
mode will still allow full speed on the Phoneline
port, but the card will operate at a lower power
consumption rate.
• High Power/Low Speed mode will give you a
700Kbps transfer rate over the Phoneline con-
nection, while still allowing the card to operate
at full power.
46

Appendix