Get Started; Install The Stand; Connect Power; Turn On The Photoframe - Philips SPF1237/12 User Manual

3 Get started

Caution
‡
Use the controls only as stated in this user
manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Install the stand

7R SODFH WKH 3KRWR)UDPH RQ D ÁDW VXUIDFH
attach the supplied stand to the back of the
PhotoFrame.
1
Insert the stand into the PhotoFrame.
2
Screw the stand into the stand hole
ÀUPO\

Connect power

Note
‡
When you position the PhotoFrame, make
sure that the power plug and outlet are easily
accessible.
Connect the supplied power adaptor to:
‡ the DC socket of the PhotoFrame
‡ the AC outlet
A few seconds later, the PhotoFrame
turns on automatically.

Turn on the PhotoFrame

Note
‡ When you connect the PhotoFrame to a
power supply, the PhotoFrame turns on
automatically.
1
When the PhotoFrame is turned off and
connected to the power supply, you can
press BACK|POWER to turn on the
PhotoFrame.
A few seconds later, the home screen
is displayed.
EN 9