Table of Contents
Advertisement
3
Enjoy
Select display auto on/off by
brightness sensor
G
ETip
• When the ambient light reaches the set
auto on/off level and lasts 15 seconds, the
Auto Sensor function takes effect.
• If the auto-on brightness level is set too
close with the auto-off brightness level,
the display Auto on/off function may not
work.
Select display auto on/off by
H
time
You can adjust the brightness sensor for
the PhotoFrame to turn on or off the display
according to the brightness of environment.
1
In the main menu, select [Settings], then
press OK to confi rm.
2
Select [Installation], then press OK to
confi rm.
3
Select [SmartPower Pro], then press OK
to confi rm.
4
Select [Screen On-Sensor] / [Screen
Off-Sensor], then press 1 (Right).
Press 3 / 4 to adjust brightness sensor,
5
then press OK to confi rm.
6
Select [Auto Screen On/Off], then press
OK to confi rm.
7
Select [Auto Sensor], then press OK to
confi rm.
With SmartPower function on the
PhotoFrame, you can confi gure the time for
the PhotoFrame to turn on or off the display
automatically.
1
In the main menu, select [Settings], then
press OK to confi rm.
2
Select [Installation], then press OK to
confi rm.
3
Select [SmartPower Pro], then press OK
to confi rm.
4
Select [Screen On-Timer] / [Screen
Off-Timer], then press 1 (Right).
Press 3 / 4 / 1 / 2 to set time, then press
5
OK to confi rm.
6
Select [Auto Screen On/Off] and press
OK to confi rm.
7
Select [Timer], then press OK to confi rm.
Advertisement
Table of Contents
