ADC Campus-REX RS Interface Card User Manual page 79

L O
OGGING
This section describes how to log on to a remote Campus unit.
1 Press the spacebar on the ASCII terminal keyboard several times until
the baud rate is established and the Login Password screen displays on
the terminal monitor.
ENTER
2 Press
password then press
3 Press 5
The menu header changes to indicate the remote unit ID as the local unit,
and local unit ID as the remote. This shows that the terminal program is
physically connected to the local unit, but is configuring as if it were
connected to the remote unit. The prompt changes to REMOTE LOGON
PASSWORD.
If the remote unit is a Campus-REX, the screens and procedures on the
Remote Main Menu are identical to those on the Local Main Menu,
except the REMOTE LOGON option is unavailable. If the remote unit is
not a Campus-REX, the screens will be those for the remote interface
card. See the User Manual for the interface card for a description of the
screens and configuration options.
L O
OGGING
From the Main Menu, type
If the Main Menu is not the current menu, type
Main Menu displays.
Campus-REX RS Interface Card User Manual
R
NTO A EMOTE
to log on. If you have changed the password, type your
ENTER
then press ENTER
C
FF OF A
Q then press
Configuring with an ASCII Terminal
C
AMPUS
. The Main Menu displays.
.
U
AMPUS NIT
ENTER to log off of the unit menus.
R
U
NIT
then press ENTER until the
5-3