ADC Campus-REX RS Interface Card User Manual page 101

6 Click Comm
Campus-RS unit is connected.
7 Click Comm
8 Click Protocol
9 In the DNL Mode Options
10 In the DNL Mode Options
11 Select the directory and file you want to copy to the Campus-RS unit.
The path and file name display in the
12 Click Start Upload
Within 20 seconds, a status bar displays to indicate upload progress.
When the upload is complete, the unit resets and terminates Download
Mode. If the Test LED remains lit, indicating that the unit is still in
Download Mode, the file was not copied successfully. Repeat the
procedure until the copy is successful.
13 Follow the steps in
on page 5-5
default values.
Campus-REX RS Interface Card User Manual
, Comm Port , then select the COM port to which the
, Baud Rate , 9600 .
, DNL Mode .
box, set the DNL Rate to
box, set the Destination to
.
"Returning Configuration Options to Default Values"
to restore the Campus-RS unit configuration options to their
Configuring with an ASCII Terminal
Standard
Local
Firmware File to Upload
.
.
box.
5-25