Trouble Shooting - Epson PM-400 How To Set Up

9. Select Wi-Fi setup in the menu and press OK.
10. If your router supports WPS, select press the WPS button on the
router and then select WPS on the printer to allow it to search.
(Connection Established)
11. If your router does not support WPS, search for the router SSID in the
list and connect by entering the password.
Please note: Router must have 2.4GHz channel open in order for the printer to connect.

Trouble Shooting

My printer is printing faded, blurry, or with an outline no fill.
• Under the Maintenance Menu perform a nozzle check
o Straight lines signify nozzle is clean
o Crooked lines signify nozzle is clogged
• Perform a Head Cleaning (this uses ink to clean; use
1-2 times only)
My printer does not see my router SSID
• Check router configuration and be sure that 2.4GHz is enabled
Please call our support team if you need assistance
setting up your rental devices
1(800) 622-6484
page 4 of 4