Advertisement
Firmware Update for the DTR-40.2/50.2 & DHC-40.2
We are pleased to offer this firmware update for the best possible performance of your AV Receiver.
A firmware update is now available through the Network or USB connections on the DTR-40.2/50.2 & DHC-
40.2
To check if your firmware is the latest version, go in to Setup -> Hardware Setup -> Firmware Update and
check the 16 digit number. (1091-1100-0010-2103)
If any of the numbers differ from the latest version available, please update your unit.
The 07/05/12 update addresses the following:
1. Improves the operation when HDMI Through is set to on
2. Stabilizes the operation of Network Control
The 09/26/11 update addresses the following:
1. Corrects problem when adding or deleting Napster service via PC Set-up program
The 11/10/10 update addresses the following:
1. Improves the playback of particular wav files
2. Corrects intermittent activation of Auto Power Down function during playback in NET/USB mode
The 10/27/2010 update addresses the following:
1. Stabilizes "Now Initializing" process to activate [NET/USB] mode in a busy network
2. Improves the playback speed of particular VR (Variable Bit Rate) mp3 files
3. Changes the timing of volume operation start (thereby avoiding problems of no sound output after power is
turned on from Standby mode with network control enabled)
The 10/1/2010 update addresses the following:
1. Stabilizes operation immediately after power is turned on (addresses problem of no sound output after A/V
receiver has been in Standby mode for an extended time with network control enabled);
2. Displays a specific error message when any error occurs during Internet radio playback;
3. Improves audio performance when Audio TV Out is set to On;
4. Stabilizes picture output just after a source component (DVD player, VCR etc) connected via Component
switches the output format between NTSC and PAL;
5. Enhances the operability of NET-related functions;
6. Improves appearance of On-Screen Display.
The latest update includes all prior updates.
We hope you enjoy the improved functionality this update provides to your AV Receiver.
2
Advertisement
