Typical Installations; Plan The Installation - Broan QTRE Series Manual

TYPICAL INSTALLATIONS

Housing mounted
to I-joists.
BH0001A
Housing mounted
anywhere between
I-joists using
hanger bars.
A
Housing mounted
to joists.
Housing mounted
anywhere between
joists using
hanger bars.
Housing mounted
anywhere between
trusses using
hanger bars.
MODELS QTR050C • QTR090C • QTR110C
QTRE050C • QTRE070C • QTRE080C • QTRE090C • QTRE110C
Housing mounted
anywhere between
trusses using
hanger bars.

PLAN THE INSTALLATION

BH0007A
4-IN. ROUND
*
DUCT
*
Purchase
separately
The unit will operate most quietly and effi ciently when located
where the shortest possible duct run and minimum number of
elbows will be needed.
Use a roof cap or wall cap that has a built-in damper to reduce
backdrafts.
Plan to supply the unit with proper line voltage and appropriate
power cable.
BH0006A
Do not install above or
inside this area.
o o
45
45
Cooking
Equipment
Floor
*
ROOF CAP
4-IN. ROUND
*
ELBOW
Page 2
WALL
*
CAP