Panasonic KX-TGF310CX Operating Instructions Manual page 35

detects sound. After you answer the call, you can
listen in on the room where the handset is located.
n From the phonebook:
1
M N#268
2
MbN: "On" a MOKN
3
MbN: Select "External" to monitor from an
outside line. a M
4
MbN: "Phonebook" a MOKN
5
MbN: Select the phonebook entry. a MOKN
R "Baby Monitor" will be displayed.
Note:
R If you edit a phonebook entry which is
assigned for monitoring, the edited entry does
not transfer to the monitor.
n By entering phone numbers:
1
M N#268
2
MbN: "On" a MOKN
3
MbN: Select "External" to monitor from an
outside line. a M
4
MbN: "Manual" a MOKN
5
Enter the desired name. a MOKN
6
Enter the desired number. a MOKN 2 times
R "Baby Monitor" will be displayed.
Note:
R The registered name/number is displayed.
Turning off the baby monitor
The monitored handset cannot be used while baby
monitor is set to "On".
Handset
1
Press M N on the handset being monitored.
2
MbN: "On/Off" a MOKN
3
MbN: "Off" a MOKN a M
Editing an outside monitoring number
Handset
1
Press M N on the handset being monitored.
2
MbN: "On/Off" a MOKN
3
MbN: "On" a MOKN
4
MbN: Select the outside line. a M
5
M N a MbN: "Edit" a MOKN
6
Edit the name if necessary. a MOKN
KX-TGF310_320CX(en)_0429_OI.pdf 35
7
Erasing an outside monitoring number
1
2
N a M N
3
4
5
6
Baby monitor sensitivity
You can adjust the sensitivity of the baby monitor.
Increase or decrease the sensitivity to adjust the
sound level needed to trigger the baby monitor
feature.
R This feature cannot be set during a monitoring
N a M N
1
2
3
Answering the baby monitor
n When monitoring with the base unit:
N
n When monitoring from an outside line:
N
Edit the phone number if necessary. a MOKN
2 times
Handset
Press M N on the handset being monitored.
MbN: "On/Off" a MOKN
MbN: "On" a MOKN
MbN: Select the outside line. a M
M N a MbN: "Erase" a MOKN
MbN: "Yes" a MOKN a M
call.
Handset
Press M N on the handset being monitored.
MbN: "Sensitivity Level" a MOKN
MbN: Select the desired setting. a MOKN a
M N
Press MZN to answer a call.
If you want to respond from the monitoring unit,
press M N.
R The monitoring unit will answer calls
automatically when the auto intercom feature
is set to "On" (page 19).
Note:
R If you receive an outside call when
communicating with the monitored handset,
the interrupt tone sounds.
To answer the call, press MZN 3 times.
*1 If M N is pressed, press M N 2 times.
Answer the call.
If you want to respond from the monitoring
phone, press #1 using tone dialling.
You can turn off the baby monitor feature by
pressing #0.
Programming
N
N
*1
35
4/29/2015 4:08:40 PM