Panel Controls - Yamaha sonogenic SHS-300 Owner's Manual

Panel Controls

1 2 3
1 [PITCH] bend wheel
For adding smooth pitch variations to the notes you play on the keyboard. Roll the wheel toward
you to raise the pitch, or away from you to lower it. With the ) [FUNCTION] button, you can
change the direction of the pitch bend (page 28).
2 [VIBRATO] button
Press this button to add a vibrato effect to notes played on the keyboard.
3 [SUSTAIN] button
Press this button to sustain the notes played on the keyboard. Release it to stop the sustain.
4 [VAR] (Variation) lamp
Glows when the instrument is on, with the color indicating the selected Voice.
See page 20 for more details on the Voices and color indications.
5 [SYNTH] button
Selects one of three synthesizer Voices each time this button is pressed.
6 [PIANO] button
Selects one of three piano Voices each time this button is pressed.
7 [GUITAR] button
Selects one of three guitar Voices each time this button is pressed.
8 [OTHER] button
Selects one of three other Voices each time this button is pressed.
9 [JAM] button
With each button press, this turns on (lamp lights), selects the Jam mode in order, and then turns
off the Jam function (lamp turns off). See page 25 for more details on Jam modes.
NOTE
When the Jam mode is set to on and the instrument receives new MIDI data, the lamp flashes momentarily.
12
SHS-300 Owner's Manual
4 5 6 7 8 9 ) !
$
@ #
C2 D2 E2 F2 G2 A2