Introduction
Base Stand Assembly Instruction
1. Place the TV with the display side down on a
t surface. Use a cloth to protect
display
.
Position the stand base pillar onto the
bottom of the TV.
INSTALLATION NOTES
Locate the TV in a room where light does not strike the screen directly. Total darkness or a
re ection on the screen can cause eyestrain. Soft and indirect lighting is recommended for
comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Please do not attempt to rotate the TV on the stand.
Avoid excessively warm locations to prevent possi ble damage to the cabinet or premature
component failure.
EN-7
the
2. Attach the stand base plate to the stand pole
by
ly tightening the supplied screws.