Introduction
Base Stand Assembly Instruction
1. Place the panel side of TV on the platform and insert the two stands into TV, making the screws holes of
stands correspond to the right holes of TV.
2. Fix screws on the bottom of back cover, one for each side, assembly finished.
M4X14MM
INSTALLATION NOTES
Locate the TV in a room where light does not strike the screen directly. Total darkness or a
reflection on the screen can cause eyestrain. Soft and indirect lighting is recommended for
comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Please do not attempt to rotate the TV on the stand.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature
component failure.
EN-7
(50")
M6X18MM
(65")