Kohler K-527 Homeowner's Manual page 22

Troubleshooting (cont.)
Troubleshooting Table
Symptoms Probable Cause
3. The interface A. Valve outlets may
functions
normally but
no water flows
from the
components.
B. Fittings/Spray
C. Hot and cold water
D. The valve memory
E. System error.
F.
4. Maximum A. Incorrect maximum
blend
temperature
too hot or too
cold.
B. If the above
1214635-5-A
Recommended Action
A. Check the valve
be blocked. outlets for blockage
or debris. Clean the
outlet screens.
B. Clean the spray faces
faces may be and any screens in
blocked. your fittings.
C. Turn on the water
supplies are not supply to the valve.
turned on.
D. Disconnect and
may require reconnect the valve
resetting. power cord from the
electrical outlet.
E. Check the user
interface for an error
code. Refer to the
"Error Code
Diagnosis" section in
this guide.
If none of the Contact your Kohler
F.
recommended Co. Authorized
actions for the Service
above issues Representative.
correct the
symptom, the
valve requires
servicing.
A. Refer to the
"Temperature – Set
temperature
setting. the Maximum"
section in this guide.
B. Contact your Kohler
recommended Co. Authorized
action does not Service
correct the Representative.
symptom, the
interface or valve
requires servicing.
22 Kohler Co.