Cassette Recorder
Cassette playback
1
Push the Source selector
slider to TAPE
Press STOP•OPEN 9/ to
2
open the cassette holder and
insert a cassette and close
the deck.
Press PLAY 1 to start
3
playback.
To pause playback press
4
PAUSE ;. To resume, press
the key again.
5
To stop the tape, press
STOP•OPEN 9/.
Fast forwarding/
rewinding
Press F.FWD/REW 5 or
1
6 unti you reach your
desired passage.
Press 9/ to stop fast for-
2
warding/rewinding.
Helpful hints:
–
During playback, the keys are
automatically released at the
end of a tape and the set is
switched off (unless PAUSE
; mode has been activated.)
18
–
During fast forwarding/rewind-
ing, the keys will not be
released at the end of a tape.
To switch off the set, make
sure the cassette keys are
also released.
General information on
recording
•
Recording is permissible
insofar as copyright or. other
rights of third parties are
not infringed.
•
For recording, use only
NORMAL type cassettes
(IEC type I) on which the
tabs have not yet been bro-
ken.This deck is not suited
for recording on CHROME
(IEC II) or METAL (IEC IV)
type cassettes.
•
The best recording level is
set automatically. Altering
the VOLUME or DBB
will not affect the recording.
•
To protect a tape from acciden-
tal erasure, break out the tabs. If
you wish to record again, cover
the tabs with a piece of adhe-
sive tape.