Page 1
MP3-CD Soundmachine MP3-CD Soundmachine Register your product and get support at Register your product and get support at www.philips.com/welcome www.philips.com/welcome User manual Manuel d’utilisation Manual de usuario Benutzerhandbuch Gebruikershandleiding Manuale dell’utente Användarhandbok Brugervejledning AZ1037...
Page 2
Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug.To change a fuse in this type of plug proceed as follows: Remove fuse cover and fuse. Fix new fuse which should be a BS1362 3 Amp, A.S.T.A. or BSI approved type.
General information Supplied Accessories...8 Environmental information...8 Safety information...8 Controls Top and front panels...9 Bottom panel ...10 Power Supply Power Supply...11-12 Basic operation / Radio Basic operation...13 Radio reception...13 CD/MP3 player About MP3...14 Playing a disc...14 Selecting a different track...15 Finding a passage within a track...15 Contents Different play modes: REPEAT and SHUFFLE...15...
General information Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome. Supplied Accessories – AC power cord Environmental informa- tion All unnecessary packaging material has been omitted.
• No naked flame sources, such as lighted candles, should be placed on the apparatus. • The mechanical parts of the set contain self-lubricating bearings and must not be oiled or lubricated. • To clean the set, use a dry cloth.
Controls ALBUM+ MP3 only: selects albums (up) PROG – programs tracks and reviews the program 6 Cassette door 7 LIFT TO OPEN – lift here to open the CD door. 8 TUNING – tunes to radio stations 9 MODE – selects different play modes: for example, REPEAT or SHUFFLE (random order)
Power supply Whenever convenient, use the power cord if you want to conserve battery life. Make sure you remove the plug from the set and wall outlet before inserting bat- teries. Batteries (not included) Main set (see 2) • Insert 6 batteries, type R-14, UM2 or C-cells (not includ- ed, preferably alkaline) with the correct polarity.
Power Supply Helpful hints: – To avoid unnecessary energy consumption, always adjust the Source selector to TAPE/OFF after using the set. Also check that the tape deck keys are released. CAUTION – Visible and invisible laser radiation. If the cover is open, do not look at the beam.
Basic operation Switching on and off and selecting functions To switch on, push the Source selector slider to CD/MP3, TUNER, or TAPE/OFF as desired. To switch off, push the Source selector slider to TAPE/OFF and check the cassette keys are released. Helpful hints: –...
CD/MP3 player About MP3 The music compression technology MP3 (MPEG1 Audio Layer 3) significantly reduce the digital data of an audio CD while maintaining CD quality sound. Getting MP3 files: you • can either download legal music files from the internet to your computer hard disc, or create such files by con- verting audio CD files in...
Push the Source selector slider to CD/MP3. ➜ Display shows --- and later, the total number of tracks. Press 2; to start playback. ➜Audio CD: current track number appears “MP3” is displayed, and dis- play shows current track number. (See 3) To pause playback, press 2;...
CD/MP3 player REPEAPT ALL – repeats the entire disc/program SHUFFLE – tracks of the entire disc are played in ran- dom order Note: – Shuffle play is not available for program playback. To select play mode, press MODE once or more. ➜Display shows the select- ed mode.
Page 17
If necessary, press ALBUM+ to select anoth- er album. ➜ Display: ALBUM and selected album number (See 9) Press § or ∞ to select your desired track number. ➜ Display: the selected track number in current album. Press PROG to store the desired track number.
Cassette Recorder Cassette playback Push the Source selector slider to TAPE Press STOP•OPEN 9/ to open the cassette holder and insert a cassette and close the deck. Press PLAY 1 to start playback. To pause playback press PAUSE ;. To resume, press the key again.
Page 19
Recording from the CD Player Select CD/MP3 source. Insert a CD and if desired, program track numbers. Press 9/ to open the cas- sette holder. Insert a blank tape and close the deck. Press REC 0 to start recording. Press 2; to start CD play- back.
Maintenance (see 0 ) CD player and CD han- dling • If the CD player cannot read CDs correctly, use a cleaning CD to clean the lens before taking the set to repair. • The lens of the CD player should never be touched! •...
If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service centre. WARNING: Do not open the set as there is a risk of electric shock.
Page 22
Troubleshooting • Replace/ clean CD, see Maintenance & Safety – Laser lens steamed up • Wait until lens has cleared – CD-R/CD-RW is blank or not finalized • Use a finalized CD-R or CD- RW only Note: Make sure the CD is not encoded with Copyright pro- tection technologies, as some do not conform to the...
Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
Page 24
Meet Philips at the Internet http://www.philips.com CLASS 1 LASER PRODUCT AZ1037 Printed in China PDCC-PXP-AZ-0819...