Basic Operations; Basic Function; Sound Control; Volume Control - Philips AZ5836/58 User Manual

Basic function

Switching the system on
●
Press STANDBY-ON B on the set or B on
the remote control.
➜
The system will switch to the last selected
source.

Sound Control

DBB and DSC sound features cannot be
activated at the same time.
DBB (Dynamic Bass Boost)
DBB enhances the bass response.
●
Press DBB on the remote twice to enable/
disable DBB feature.
➜
Some discs might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.
DSC (Digital Sound Control)
DSC provides a different type of preset sound
equalizer setting.
●
Press DSC on the remote repeatedly to select:
ROCK, CLASSIC, POPS, JAZZ.

Volume control

Turn the VOLUME control on the set or VOL
+/- on the remote to increase or decrease the
volume level.
➜ "VOL XX" is displayed on the display panel.
"XX" denotes the volume level.
To switch off the volume temporarily
●
Press MUTE on the remote.
➜
Playback will continue without sound and
"MUTE" appears.
●
To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Basic Opeations

Karaoke

Connecting a microphone (not supplied) to the
system allowing you to sing along with the music
source.
1
Connect microphone to the MIC jack.
●
Before connecting the microphone, set the
microphone MIC to the minimum level to
prevent howling sound.
2
Press SOURCE repeatedly on the set or DISC
on the remote control to select the source to be
mixed and start playback.
3
Adjust the volume level of the source with the
master VOLUME control.
4
Adjust the microphone volume with the
microphone MIC control.
5
To set the echo level, press SYSTEM MENU
on the remote, and then select AUDIO
SETUP > ECHO.
Note:
– Keep the microphone away from the speakers to
prevent howling.
– The MIC SETUP and MIC VOL also can be set in
AUDIO SETUP.
13