Sony XAV-AX7000 Help Manual page 45

Hide thumbs Also See for XAV-AX7000:

Table of Contents

Item

Selects the mode for the subwoofer connected to the rear speaker lead without a power amplifier: [OFF],

[1], [2], [3]. As the setting number increases, the subwoofer audio level increases. When connecting

Subwoofer

normal speakers to the rear speaker leads, set to [OFF]. Be sure to connect a 2Ω or 4 Ω to 8 Ω

Direct

subwoofer to either of the rear speaker leads. When using a 2 Ω subwoofer, set [Speaker Impedance

Load] to [2 Ohm]. Do not connect a speaker to the other rear speaker lead. (Available only when the

source is off.)

Subwoofer

Selects the subwoofer phase: [Normal], [Reverse].

Phase

Speaker

Sets the impedance load of the speaker connection: [4 Ohm] (4 Ω load connection), [2 Ohm] (2 Ω load

Impedance

connection). Be sure to set to [2 Ohm] when making the speaker parallel connection for high volume

Load

playback. (Available only when the source is off.)

Volume

Sets the limit of the maximum volume to prevent an internal error of the unit: 30 to 50.

Limiter

Table of Contents