Table of Contents
Advertisement
INSTALLATION (BETWEEN JOISTS MOUNTING) CONTINUED
13. Lock the lamp cover.
Make sure the lamp cover is locked securely.
Otherwise the lamp cover may drop.
14. Insert the mounting springs into the slot as shown
in the figure and attach the trim ring to the fan
body. (Fig. 10)
MAINTENANCE (CLEANING)
Routine maintenance must be done every year.
Do not immerse motor in water when cleaning.
1. Remove the trim ring by pulling down the mounting springs.
(Squeeze mounting spring and pull down carefully.) (Fig. 11)
2. Clean the trim ring. (Don't put into hot water. Use
non-abrasive kitchen detergent, wipe dry with clean cloth.)
(Fig. 12)
2-Mounting
①
springs
2-Mounting
springs
Gloves
Gloves
2-Slots
②
Trim ring
Trim ring
Trim ring
Fig. 10
Ceiling
Fig. 11
Fig. 12
9
Hide quick links:
Advertisement
Table of Contents
