Table of Contents
Advertisement
Topbar
On the topbar you will find the following functions: WiFi,
mySewnet™ button, firmware update, JoyOS advisor™ button,
quick help, settings and sewing/embroidery mode toggle.
Note: All functions may not always be available at the same time.
WiFi
Touch the WiFi button in the topbar and activate WiFi.
Select a network from the list of available networks. If your
network is password protected, you will be prompted to
enter the password in the pop-up.
You can also connect to a network with WiFi in settings.
If you do not get any signal or have a low signal strength see
troubleshooting.
WiFi is connected with high signal strength.
WiFi is connected with medium signal
strength.
WiFi is connected with low signal strength.
WiFi is connected but the network does not
work properly.
WiFi is disconnected. Connect to a network
through the WiFi button or WiFi settings.
Read more about WiFi in the machine in the WiFi chapter.
mySewnet™
Touch the mySewnet™ button on the topbar and touch sign in
button to open a pop-up. Sign in to your mySewnet™ account
or create a new mySewnet™ account.
When signed in you will see how much available space there
is left in the mySewnet™ cloud.
The synchronization status will be shown on the mySewnet™
button on the topbar:
If your machine cannot connect to mySewnet™ cloud or does
not synchronize, see troubleshooting.
All files in the machine and mySewnet™ cloud
are synchronized.
The machine is currently synchronizing files
with the mySewnet™ cloud.
1. WiFi
2. mySewnet™
3. Wireless firmware
update
4. JoyOS advisor™ feature
4 The Multi-Touch Screen
5. Quick help
6. Settings
7. Sewing/embroidery
mode toggle
57
Advertisement
Table of Contents
Troubleshooting
