Equalization Settings; I Have A New Router - Sonos PLAY:1 Product Manual

Sonos PLAY:1
• On a mobile device, go to More -> Settings -> Advanced Settings and choose Control Sonos from
Spotify.
• On a PC, go to Manage -> Settings and choose Advanced. From the Music Sources tab, choose
Control Sonos from Spotify.
• On a Mac, go to Sonos -> Preferences and select Advanced. From the Music Sources tab, choose
Control Sonos from Spotify.

Equalization settings

The Sonos PLAY:1 ships with the equalization settings preset to provide the optimal playback experience. If
desired, you can change the sound settings (bass, treble, balance, or loudness) to suit your personal
preferences.
Note: Balance is only adjustable when the PLAY:1 is used in a stereo pair.
On a mobile device, go to More -> Settings -> Room Settings.
1.
Select a room.
2.
Select EQ, and then drag your finger across the sliders to make adjustments.
3.
To change the Loudness setting, touch On or Off. (The loudness setting boosts certain frequencies,
4.
including bass, to improve the sound at low volume.)

I have a new router

If you purchase a new router or change your ISP (Internet service provider), you will need to restart all your
Sonos products after the router is installed.
Note: If the ISP technician connects a Sonos product to the new router, you only
need to restart your wireless Sonos products.
Disconnect the power cord from all of your Sonos products for at least 5 seconds.
1.
Reconnect them one at a time, starting with the Sonos product that is connected to your router (if one is
2.
usually connected).
Wait for your Sonos products to restart. The status indicator light will change to solid white on each
product when the restart is complete.
If your Sonos setup is completely wireless (you don't keep a Sonos product connected to your router), you
will also need to change your wireless network password. Follow the steps below:
Temporarily connect one of your Sonos speakers to the new router with an Ethernet cable.
1.
Go to More -> Settings -> Advanced Settings -> Wireless Setup.
2.
Sonos will detect your network.
Enter the password for your wireless network.
3.
Once the password is accepted, unplug the speaker from your router and move it back to its original
4.
location.
11