Philips FW775P/22 Instructions For Use Manual page 23

Press 'STANDBY- ON' for 2 seconds to
EASY SET
RADIO
set radio stations automatically
REPEAT
RDS NEWS!
SHUFFLE
PROGRAM
FW 530C
MINI HIFI SYSTEM
CLOCK • TIMER C D 1 • 2 • 3
STANDBY . ON
C D
RECORD SEARCH
REVERSE MODE
TUNING
Recording from other sources
deck 2)
1 Press TAPE to select tape deck 2.
2 Load a blank tape into tape deck 2 with the open side
downward.
3 Press REVERSE MODE to select the playback mode
( or ).
4 Press CD, TUNER or AUX.
• Start playback of the selected source.
5 Press RECORD to start recording.
™ The REC flag starts flashing.
6 Press STOPÇ to stop recording.
Notes:
– Only or mode is available during recording.
– During recording, it is not possible to listen to another
source.
pg 001-27/FW775-765P/22-Eng 23
JAZZ
STEREO
DBB
I S PHANTOM
3 STEREO MAX
DYNAMIC
TIMER
NEWS FM MW LW HSD REC AM PM BASS BOOST
BAND TAPE 1 • 2 VIDEO PROGRAM
TUNER TAPE AUX
DUBBING
STOP PAUSE PREV NEXT
PLAY NORMAL • FAST
PRESET
CLEAR SIDE A • B
VOLUME
Dubbing tapes
(only on tape (from tape deck 1 to tape deck 2)
1 Press TAPE to select tape deck 2.
2 Load the prerecorded tape into tape deck 1 and a blank
tape into tape deck 2.
™ Make sure that the tape in tape deck 1 has its full
spool to the left.
3 Press DUBBING once for normal speed dubbing or
twice (within 2 seconds) for high speed dubbing.
™ "NORMAL" (normal speed) or "FAST" (high speed)
will be displayed and then followed by
"DUBBING".
™ The HSD flag appears on the display for high speed
dubbing.
• Dubbing will start immediately.
™ The REC flag starts flashing.
4 Press STOPÇ to stop dubbing.
Notes:
HOME CINEMA CONTROL
– At the end of side A, flip the tapes to side B and
CLASSIC ROCK TECHNO
repeat the procedure.
DIGITAL SOUND CONTROL
– Dubbing of tapes is only possible from tape deck 1 to
INCREDIBLE
SURROUND
tape deck 2.
DOLBY PRO LOGIC
PRO LOGIC PHANTOM 3 STEREO
– To ensure good dubbing, use tapes of the same length.
– During high speed dubbing in Tape mode, the sound is
reduced to a low volume.
– You can switch to other source while dubbing.
CD Synchro Start Recording
1 Load a blank tape into tape deck 2 and a disc into the
disc tray.
n
2 Press CD to select CD mode.
• You can program the tracks in the order you want them
to be recorded (see Programming Tracks). If not, the
tracks are recorded according to the selected disc.
3 Press RECORD to start recording.
™ The REC flag starts flashing.
• CD will start playback automatically.
4 Press STOPÇ to stop recording.
9/1/99, 9:38 AM
RECORDING
23
3139 116 17601