Section 2 General Information And Setup; Know Your Water Pump - Generac Power Systems PowerMate 1020 Owner's Manual

Section 2 General Information and Setup

D
C
B
A
TABLE 1. Water Pump Components
A Water Drain Plug
B Suction Port
C Pump Housing
D Water Priming Plug
E Handle
F Discharge Port
G Engine
H Throttle
I Air Cleaner
J Choke
K Fuel Cap
L Engine Start Switch
M Priming Bulb
N Spark Plug (inside top cover)
O Muffler (inside top cover)
P Oil Fill Cap/Dipstick
Q Recoil Starter Handle
4
E
F
G
Figure 2-1. Features and Controls
H
I
J
K
M
L
Q

Know Your Water Pump

Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
Read this manual
assembling and operating this equipment.
Save this manual for future and immediate
reference. Replacement owner's manuals are
available at www.powermate.com.
This pump is designed to pump clear water
only. Do not use for pumping the following:
• Muddy water
• Seawater
• Drinking water
• Kerosene
• Fuel, oil, or solvents
• Chemicals
Owner's Manual for Water Pump
N
O
P
000670
WARNING
thoroughly
(000100a)
before