Appendices; Frequently Asked Questions; What Should I Do If I Forget The Screen Lock Code; What If Two Users Change The Same Setting At The Same Time - Siemens RDS120 User Manual

8 Appendices

8.1 Frequently asked questions

8.1.1 What should I do if I forget the screen lock code?

8.1.2 What if two users change the same setting at the same
8.1.3 Will the thermostat work if the connection to the cloud is

8.1.4 Why does the scheduled Eco mode change to Comfort?

8.1.5 What is the difference between Administrated WLAN and
A6V10733807_enUS_a
Try using the administrator password to unlock the screen.
To unlock the screen using the administrator password
1. On the thermostat screen indicating that the screen lock code is incorrect, tap
the question mark and then tap "".
2. Input the administrator password, and then tap "OK".
time?
The last command received by the server takes effect.
lost?
Yes, the thermostat works with or without the network connection:
● If there is network connection to the cloud and you have also set the schedule,
the thermostat operates per the schedule. The temporary change of the
temperature setpoint is effective only during the current scheduled mode.
● If there is network connection but you have not set the schedule, the
thermostat operates per the system default schedule. For more information
about the default schedule, see Setting schedules [➙ 29].
● If there is no network connection or valid time, the thermostat cannot get
schedule information from the cloud. It always then operates in "Comfort"
mode.
This is probably because the thermostat detects that someone enters into the room
when a scheduled "Unoccupied" mode is running. In this case, the thermostat
switches from "Unoccupied" to "Comfort" automatically until the next scheduled
mode starts. However, you can turn off the auto-switch by disabling the ""
parameter under "Advanced Settings".
Disable the switch from "Unoccupied" to "Comfort" even if the room is
occupied
1. On the Home screen, tap
2. If prompted, enter the administrator password.
3. Tap , tap , and then tap
4. Drag the slider to the left.
Private WLAN?
"Administrated WLAN *" is supposed to connect to an infrastructure network
managed by facility managers; "Private WLAN" fits for owner cases and is
Frequently asked questions
, tap and then tap .
. Scroll down and tap "".
Appendices
8
31 | 38