Renault MASTER User Manual page 53

chilD safETy: choosing a child, baby seat mounting
The two rings 1 are located between the
seatback and the seat base of the seat
ü
and are identified by a
1
4
The third ring is used to attach the
upper strap on some child seats.
– Place the headrest in the top position
symbol.
or remove it;
– pass the belt 2 (supplied with the
seat) between the two rear headrest
rods;
– the hook 3 must be attached to the
ring 4 located behind the seatback
and marked by the symbol
– tighten the belt.
(2/2)
2
3
Check that the seatback
of the forward-facing child
seat is in contact with the
back of the vehicle seat. In this
case, the child seat may not always
rest on the base of the vehicle seat.
The ISOFIX anchorage
points have been exclu-
sively designed for child
seats with the ISOFIX
system. Never fit a different type of
child seat, seat belt or other objects
to these anchorage points.
Check that nothing is obstructing
the anchorage points.

;
If your vehicle has been involved in
a road accident, have the ISOFIX
anchorage points checked and re-
place your child seat.
1.39