How To Connect Plug; Mains Plug; Important Notes For Users In The U.k; Dichiarazione Di Conformita - Philips MC148/22 User Manual

INDEX
English
..................................................................................... 4
Français
................................................................................ 15
Español
................................................................................. 26
Deutsch
................................................................................ 37
Nederlands
......................................................................... 48
Italiano
................................................................................... 59
Português
........................................................................... 70
Dansk
..................................................................................... 81
Svenska
............................................................................... 92
Suomi
................................................................................... 103
Έλληνικά
...................................................................... 114
2
MC 148 / 22 POL page 2

Important notes for users in the U.K.

Mains plug

This apparatus is fitted with an approved moulded 13 Amp plug. To
change a fuse in this type of plug proceed as follows:
1 Remove fuse cover and fuse.
2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI
approved type.
3 Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut
off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5 Amp. If
a plug without a fuse is used, the fuse at the distribution board should
not be greater than 5 Amp.
Note: The severed plug must be disposed to avoid a possible shock
hazard should it be inserted into a 13 Amp socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the following code: blue
= neutral (N), brown = live (L).
As these colours may not correspond with the colour markings
identifying the terminals in your plug, proceed as follows:
• Connect the blue wire to the terminal marked N or coloured black.
• Connect the brown wire to the terminal marked L or coloured red.
• Do not connect either wire to the earth terminal in the plug, marked
E (or e) or coloured green (or green and yellow).
Before replacing the plug cover, make certain that the cord grip is
clamped over the sheath of the lead - not simply over the two
wires.Copyright in the U.K.: Recording and playback of material may
require consent. See Copyright Act 1956 and The Performer's Protection
Acts 1958 to 1972.
n Norge
Typeskilt finnes på apparatens underside.
Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen
er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet
nettkontakten.
For å redusere faren for brann eller elektrisk støt; skal apparatet ikke
utsettes for regn eller fuktighet.
i Italia

DICHIARAZIONE DI CONFORMITA'

Si dichiara che l'apparecchio MC 148 Philips risponde alle prescri-
zioni dell'art. 2 comma 1 del D. M. 28 Agosto 1995 n. 548.
Fatto a Eindhoven, il 27-09-1999
Philips Consumer Electronics
5616 JB Eindhoven, The Netherlands
Polski
..................................................................................... 127
MAGYARORSZÁG
Minõségtanúsítás
Figyelem!
Garancia
Teljesítmény
Befoglaló méretek
Rádiórész vételi tartomány
Erõsítõrész
Philips, Glaslaan 2