Attach the dust cover to the hinges, pressing down to lock them into place. Connection Diagram Since Max LP has built-in speakers, it is not necessary to connect speakers in order to listen to your vinyl records. However, if you want to connect your own speakers, please see the following diagram.
Page 3
You can simply listen to your music using Max LP’s internal speakers. If you prefer to use your own stereo speakers, you can connect Max LP's RCA outputs to a stereo system or to powered speakers. Do not connect them to phono-level inputs; Max LP's RCA outputs are line-level and could damage a device with phono-level inputs.
Make sure that Max LP is powered on and that the needle is on the record. o Connect Max LP's RCA outputs to a stereo system or powered speakers. (Do not connect them to phono-level inputs; Max LP's RCA outputs are line-level and could damage a device with phono-level inputs.) o Make sure to adjust the volume knob on the turntable in order to hear your vinyl record playing through the built-in speakers.
Page 5
If the 33 / 45 / 78 switch is set correctly and the speed it still slightly off, do the following: On the underside of Max LP, find the rubber pad with the RPM speed you want to adjust, and gently lift up the rubber pad to remove it.