Automatic Operation Mode - Bosch Rexroth IndraMotion MTX micro Commissioning Manual

DOK-MTXMIC-EASY*******-CO04-EN-P
Rexroth IndraMotion MTX micro Easy setup for Standard Turning and Milling Machines

Automatic Operation Mode

Press the <MDI> key to activate the screen. MDI blocks can be entered in the
editor field to the left and processed separately <F3> or continuously <F4>.
Fig.9-12: Automation screen
Press the <Auto> key to switch to automatic mode and activate the screen.
Press <F2> to start the NC program selection. After having selected the desired
program with the cursor keys (▲, ▼) and <TAB> if necessary, press <Enter> to
activate the program. Provided the program is faultless and power is turned on,
press the <NC Start> key to start processing the program. Press <F3> to edit
the active NC program.
Bosch Rexroth AG
Operating the IndraMotion MTX micro
119/141