Table of Contents
Advertisement
Programming tracks
You may store up to 20 tracks in the desired
sequence. If you like, store any track more than
once.
1
In the stop position, press PROG to activate
programming.
➜ PROG indicator flashes.
➜ Display shows 0, indicating the start of the
program.
2
Press 4 or ¢ to select your desired track..
3
Press PROG to store the desired track number.
➜ Display shows 0 for you to program the
next desired track.
4
Repeat steps 2 to 3 to select and store all
desired tracks in this way.
➜ Display shows -- if you try to program more
than 20 tracks.
5
To play your program, pressÉ Å .
➜ PROG indicator flashes during playback.
To review the program
● In the stop position, press repeatedly PROG to
see your stored track numbers.
To erase the program
● You can erase the contents of the memory by:
– in the stop position, pressing PROG to enter
program mode, and then press 9;
– selecting TUNER or TAPE;
– Opening the CD door.
➜ PROG indicator lights off.
Disc Operation
Different play mode: REPEAT
You can select and change the play mode before
or during playback, and combine the REPEAT
mode with PROG (program).
Repeat one (REPEAT indicator flashes)
– plays the current track continuously.
Repeat all (REPEAT indicator lights up)
– repeats the entire disc/program.
1
To select play modes, press once or more
REPEAT before or during playback.
➜ REPEAT indicator flashes or lights up.
2
PressÉ Å to start playback if in the stop
position.
3
To return to normal playback, press REPEAT
repeatedly until REPEAT indicator lights off.
➜ You can also press 9 to cancel your play
mode.
13
Advertisement
Table of Contents
