Table of Contents
Advertisement
Installation
Power Supply
Whenever convenient, use the power supply
cord if you want to conserve battery life. Make
sure you remove the plug from the set and wall
outlet before inserting batteries.
Batteries (not included)
1
Open the battery compartment door and insert
eight batteries, type R-14, UM-2 or C-cells,
(preferably alkaline) with the correct polarity as
indicated by the "+" and "–" symbols inside the
compartment.
1.5V x 8 UM2 OR "C" SIZE
2
Replace the compartment door, making sure the
batteries are firmly and correctly in place. The set
is now ready to operate.
– Incorrect use of batteries can cause
electrolyte leakage and will corrode the
compartment or cause the batteries to burst.
– Do not mix battery types: e.g. alkaline with
carbon zinc. Only use batteries of the same type
for the set.
– When inserting new batteries, do not try to
mix old batteries with the new ones.
– Remove the batteries if the set is not to be
used for a long time.
Batteries contain chemical substances, so
they should be disposed of properly.
10
110V
220V
Using AC power
1
If your system is equipped with a VOLTAGE
SELECTOR (located inside
the battery compartment), set
this selector to your local
power voltage if necessary.
2
Make sure all connections have
been made before switching
on the power supply.
3
Connect the power cable supplied to
AC ~ and to the wall socket. This switches on
the power supply.
The type plate is located on the rear of the
set.
Advertisement
Table of Contents
