Philips MCM760/37B Owner's Manual page 30

TAPE
IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
Preparation
1
Press TAPE/AUX once or more to select
TAPE(or TAPE on the remote control)
2
Load a recordable tape into the tape deck.
3
í ë
Press or on the remote control to select
the recording tape side.
➜
A appears on the display for the reverse side
➜
B appears on the display for the forward
side
4
Press TAPE A/B repeatedly on the remote
control to select a recording mode.
➜
å for recording on one side only.
➜
∂ for recording on both sides.
∂ ∂ ∂ ∂
5
Prepare the source to be recorded.
CD – load the disc
TUNER – tune to the desired radio station
USB – connect a USB device
AUX – connect external equipment
Helpful hints:
When recording is in progress, it is not possible:
– to change tape side;
– to listen to another source;
– to activate the timer function.
– One Touch Recording is not possible in TAPE
mode, "SELECT SOURCE" will appear.
30
Tape recording
One touch recording
1
Select the recording source: CD, TUNER,
USB or AUX
2
Start playback of the selected source
3
Press TAPE RECORD
➜
starts flashing
REC
4
To stop recording, pressÇon the set
CD/USB Synchro start recording
1
Select the recording source: CD or USB
2
If necessary, press í or ë once or repeatedly
until the desired track number appears in the
display
●
MP3/WMA: Press à / á and í or ë to
select the desired album and track
Or
●
Program your desired tracks (see CD:
Programming tracks)
- Make sure you press Ç after finishing
programming
2
Press TAPE RECORD
➜
The playback and recording start
automatically
3
For brief interruption, pressÉ Å . To resume
recording, press É Å again
4
To stop recording, pressÇ
➜
Recording and playback will stop
simultaneously