Weil-McLain GOLD GV 3 Series Manual page 13

• Installation • Start-Up • Parts • Maintenance
Ie
Prepare boiler location —
Air contamination
Please review the following information on potential
combustion air contamination problems.
If the boiler is installed in
would contaminate the air cannot be removed, you must
air intake. Contaminated combustion air will damage the boiler, resulting in possible severe
personal injury, death or substantial property damage. Do not install GV boiler in a
room or pool facility, for example
contain contaminants.
Table 2 Corrosive contaminants
Products to avoid
Spray cans containing chloro/fluorocarbons
Permanent wave solutions
Chlorinated waxes/cleaners
Chlorine-based swimming pool chemicals
Calcium chloride used for thawing
Sodium chloride used for water softening
Refrigerant leaks
Paint or varnish removers
Hydrochloric acid/muriatic acid
Cements and glues
Antistatic fabric softeners used in clothes dryers
Chlorine-type bleaches, detergents, and cleaning
solvents found in household laundry rooms
Adhesives used to fasten building products and
other similar products
Part number 550-141-850/0699
contamination
Refer to Table 2 for products and areas which may cause
contaminated combustion air.
any area likely to cause contamination
, without using ducted outside air. These areas will always
Areas likely to have contaminants
Dry cleaning/laundry areas and establishments
Swimming pools
Metal fabrication plants
Beauty shops
Refrigeration repair shops
Photo processing plants
Auto body shops
Plastic manufacturing plants
Furniture refinishing areas and establishments
New building construction
Remodeling areas
Garages with workshops
, or if products which
pipe combustion air to the boiler
laundry
13